Quick Sift Cannabis Sifting Machine

A Quick Sift Cannabis Sifting Machine processes already-ground cannabis flower through a removable mesh screen. It can help separate stems, large leaves, oversized particles, and other material that is too large to pass through the selected screen.

More consistent material can improve cone filling, packing, airflow, and burn performance. A Quick Sift does not grind whole flower, detect contaminants, or replace required inspection and product testing.

The order includes the selected Quick Sift Mini or Quick Sift Commercial machine and one compatible screen in the selected mesh size.

Additional and replacement screens are available separately. Quick Sift Mini and Quick Sift Commercial screens are model-specific and are not interchangeable.

Both models are stainless-steel sifting machines with removable screens.

• The Quick Sift Mini is a compact machine approximately 13.75 inches in diameter. It uses a 12-inch-diameter, 4-inch-deep screen.

• The Quick Sift Commercial uses a 16-inch-diameter, 5-inch-deep screen, holds more material, and requires assembly of the hopper, screen, and hardware.

The best model depends on available workspace, batch size, production volume, and desired screen options.

Published output for both models is approximately one pound of ground material in two to three minutes.

Actual throughput depends on the material, screen mesh, batch size, moisture, particle size, and desired level of separation. This rate describes the sifting stage, not finished pre-roll production.

Lower mesh numbers have larger openings, while higher mesh numbers have smaller openings.

Screens in the 8- to 16-mesh range are generally used to separate stems, leaves, and oversized particles from ground flower. A 10- or 12-mesh screen is a practical starting point for many pre-roll applications. Screens beginning around 60 mesh are intended for kief and other fine-material separation.

Test the selected screen with your flower, grinder setting, cone, target weight, and filling equipment before standardizing production.

No. A finer screen produces smaller particles, but material that is too fine may pack tightly, restrict airflow, or burn inconsistently.

The best particle size depends on the flower, moisture, cone size, target weight, filling equipment, packing method, and desired smoking characteristics.

A common workflow is to:

• Grind the cannabis flower coarsely.

• Sift the ground material to remove oversized particles.

• Regrind the sifted flower if a finer particle size is needed.

• Fill the prepared flower into pre-rolled cones.

• Verify weights, close the pre-rolls, perform quality control, and package the finished products.

The right workflow depends on the starting material and finished-product requirements.

Quick Sift machines are primarily designed for already-ground cannabis flower.

Sticky, oily, infused, or high-moisture material may clump, adhere to the equipment, clog the screen, slow production, or produce inconsistent separation. Conduct controlled testing before processing a full batch.

Follow the manufacturer's manual and your facility's sanitation procedures.

In general:

• Turn off and unplug the machine before removing the screen or cleaning.

• Remove residual plant material after each batch.

• Clean the removable stainless-steel screen and other product-contact surfaces regularly.

• Allow all components to dry completely before reassembly.

• Keep the motor and electrical components dry.

• Inspect the screen, frame, fasteners, and moving parts for damage or residue buildup.

Do not immerse the motor or electrical base.

Current specifications include:

• Quick Sift Mini: approximately 13.75-inch machine diameter; 12-inch-diameter, 4-inch-deep screen; 110V power

• Quick Sift Commercial: 16-inch-diameter, 5-inch-deep screen; 50W; 60Hz

• Warranty: limited one-year warranty covering the motor and electrical components

The Quick Sift Commercial requires assembly of the hopper, screen, and hardware. The manufacturer lists a 13mm wrench, 14mm wrench, and needle-nose pliers as required tools that are not included.

Confirm voltage, frequency, and plug compatibility before ordering, particularly for the Quick Sift Commercial or an international installation.

Quick Sift machines require a separate shipping or freight quote. Contact Sana Packaging to confirm the model, screen mesh, availability, assembly requirements, electrical compatibility, shipping options, and landed costs.